Showing posts with label boot. Show all posts
Showing posts with label boot. Show all posts

Monday, September 19, 2016

How to setup the default OS in GRUB dual boot system eg Ubuntu and Windows

How to setup the default OS in GRUB dual boot system eg Ubuntu and Windows


Of course it works with Ubuntu, Linux Mint, Linux Mint Debian Edition, or other Ubuntu based linux distro.

When system starts write down exactly each rows of GRUB menu (e.g.: Linux, recovery mode, memtest86+, Windows).
Or type in Terminal:
# fgrep menuentry /boot/grub/grub.cfg

Choose which OS you want to start as default.
Write down the line number of the Operating System you want to boot first.
The first line starts from 0

eg:

Ubuntu, Linux 2.6.31-14-generic
Ubuntu, Linux 2.6.31-14-generic (recovery mode)
memory test (memtest86+)
memory test (memtest86+, serial console 115200)
Windows 7 (loader) (on /dev/sda1)

Where
"Ubuntu, Linux 2.6.31-14-generic" is 0 (zero row ) and
"Windows 7 (loader) (on /dev/sda1)" is 4 (4th row)

Open a Terminal, and type:
# sudo nano /etc/default/grub
(of course you can use other editor as well)

Search *GRUB_DEFAULT* row, change the default value (which is 0) to the value you wrote down before.

GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10

In grub config file, you can also change the GRUB default time out length.
Then save the GRUB file.

Dont forget to update GRUB.
Run a command in the terminal:

# sudo update-grub

If you want to do these steps with GUI, you can use GRUB customizer software.
Read more about it here.

Source: NAM HUY LINUX

Available link for download

Read more »
Posted by at
Labels: , , , , , , , , , , , , , ,

Saturday, August 27, 2016

Cara Memperbaiki Boot Loop of Death di iOS 9 Jailbreak

Cara Memperbaiki Boot Loop of Death di iOS 9 Jailbreak


Cara Memperbaiki Boot Loop of Death di iOS 9 Jailbreak- Pangu versi 1.0.1 untuk iOS 9 telah hadir, kemudian pengguna iOS 9 jailbreak membutuhkan update tool dari Pangu kembali. Karena ada sebagian user iOS 9 yang telah di jailbreak mengalami Boot Loop of Death. Ini terjadi karena user tidak melakukan clean shutdown dengan cara tahan tombol power iPhone atau iPod "Slide to Power Off".
Boot Loop of Death

Pengertian Boot Loop of Death atau BLOD 

Jika Anda mengalami ini setelah install tweak jailbreak dari Cyndia bermasalah atau tidak cocok maka itu bukan namanya BLOD. Salah datu cara yang dapat Anda lakukan ketika menghadapi masalah ini yaitu dengan reboot perangkat Anda kemudian tahan tombol Volume Up setalah itu Anda hapus tweak yang bermasalah tadi.
Sebenarnya BLOD adalah terjadi ketika user iOS 9 jailbreak melakukan restart, sehingga iPhone atau iPad melakukan restart secara random atau tidak terduga. Saya sarankan untuk Anda user iOS 9 jailbreak untuk tidak melakukan restart  dengan menekan tombol Home dan Power.

Hal-hal yang harus dilakukan ketikan Boot Loop of Death.

Salah satunya yang Anda dapat lakukan adalah restore ulang iPhone atau iPad Anda. Solusi yang terbaik adalah itu. pertanyaannya adalah bagaimana cara melakukan restore iOS dengan BLOD ? Oke saya punya caranya, simak baik-baik dibawah ini.
1.  Aktifkan mode DFU di iPhone atau iPad yang bermasalah.
  • Hubungkan iPhone atau iPad ke Komputer.
  • Buka iTunes.
  • Kemudian tekan dan tahan tombol Home dan Power selama 10 detik.
  • Setelah 10 detik, lepaskan tombol Power tapi tetap tekan tombol Home sampai iTunes mendetek iOS anda masuk ke dalam DFU Mode.
2. Setelah Anda merestore device iOS ke dalam DFU, Caranya
  • Silahkan Download ios 9.0.2 untuk iPhone atau iPad.
  • Setelah di download kemudian tekan Shift dan "Chek for Update". Jika Anda user Windows di iTunes atau tekan tombol Option dan "Chek for Update"(user Mac).
3. Proses Restore sedang berjalan. Setelah restore ulang iOS selesai silahkan lakukan pengaturan awal iPhone atau iPad Anda.
4. Skip saja jika Anda menemukan pengaturan Touch ID/Passcode, iTuned, iCloud.
5. Waktunya Jailbreak kembali. Silahkan Anda Download dahulu Pangu versi 1.0.1.
6. Kemudian lakukan langkah-langkah jailbreak mengunakan Pangu.
7. Setelah selesai Pastikan Cydia ada di Homescreen, Aktifkan Airplane Mode setelah itu hubungkan iPhone atau iPad ke jaringan internet. 
8. Buka Cydia samapi Cydia benar-benar terbuka penuh.
9. Klik tab Changes, lalu install Cydia Substrate versi terbaru lalu tunggu Cydia melakukan Respring.
10. Setelah Respring. Tekan Power lalu pilih "Slide to Power Off"
11. Kemudian nyalakan.
12. Setelah iPhone atau iPad hidup lagi. silahkan reboot sampai logo Apple muncul kembali kemudian lepas kedua tombol tersebut.

Cara Mencegah Boot Loop of  Death

Saya sarangkan melakukan reboot iOS 9 jailbreak dengan cara yang benar yaitu menekan tombol Home + Power. Untuk melakukan Clean Shutdown (Tekan Power kemudian "Slide to Power Off").
Update : Silahkan Install Package "Pangu 9.0.x Untether" melalui Cydia > Changes. Kemudian Install. Kalian tidak perlu repot-repot jailbreak ulang untuk memperbaiki masalah Boot Loop of Death ini.

Available link for download

Read more »
Posted by at
Labels: , , , , , , , , ,

Tuesday, August 16, 2016

Add Me Fast Boot 2015

Add Me Fast Boot 2015


Add Me Fast meruapakan salah satu website exchange traffic, disini banyak macam exchange traffic yang bisa di pilih mulai dari like facebook, share facebook, follower twitter, youtube view, youtube subscribe, instagram dan lain-lain. Sistem kerjanya sangat mudah yaitu dengan cara menukar point yang kita miliki dengan exchange traffic sesuai yang kita inginkan.

Karena point merupakan point utama untuk mendapatkan traffic yang tinggi maka dari itu saya coba berbagi Bot dimana fungsi bot ini bisa mengumpulkan point secara otomatis. tanpa perlu kita pantau atau kita jalankan secara manual seperti yang ada di website.



Langkah-langkahnya :
  • Buat akun Add me fast Disini
  • Jika sudah anda akan mendapatkan bonus point sebesar 50 Point
  • Anda bisa langsung menyetting website, Facebook, Youtube apa saja yang ingin anda Exchange Traffic. 
  • Bagi anda yang ingin mengumpulkan Point saja anda bisa langsung menjalankan Botnya
  • Bukan Bot nya dan login sesuai dengan login akun yang anda buat tadi "sebelum anda login dengan bot sebaiknya anda logout terlebih dahulu akun anda yang anda buka dengan browser karena tidak bisa melakukan double login, atau sebaliknya"
  • Setelah anda login di bot ada 2 pilihan yang bisa anda pilih untuk menambah point anda yaitu Website Hit atau Youtube, disini saya sarankan memilih yang Youtube karena Point yang di dapatkan lebih besar.
  • Bot ini bisa di jalankan di Real PC / Laptop atau bisa juga di jalankan di RDP
Link Download :

Add Me Fast Bot : Direct Link
or
Add Me Fast Bot : Direct Link

Terima Kasih dan Semoga Bermanfaat

Available link for download

Read more »
Posted by at
Labels: , , , ,

Friday, August 12, 2016

Function keys to enter the BIOS Boot Menu

Function keys to enter the BIOS Boot Menu


System BIOS boot keys for laptops and desktops

Related article: Laptops Recovery Function Keys

Manufacturer
Type
Models
Boot Menu
Acer


Esc, F12, F9
Acer
netbook
Aspire One zg5, zg8
F12
Acer
netbook
Aspire Timeline
F12
Acer
netbook
Aspire v3, v5, v7
F12
Apple

After 2006
Option
Asus
desktop

F8
Asus
laptop
VivoBook f200ca, f202e, q200e, s200e, s400ca, s500ca, u38n, v500ca, v550ca, v551, x200ca, x202e, x550ca, z202e
Esc
Asus
laptop
N550JV, N750JV, N550LF, Rog g750jh, Rog g750jw, Rog g750jx
Esc
Asus
laptop
Zenbook Infinity ux301, Infinity ux301la, Prime ux31a, Prime ux32vd, R509C, Taichi 21, Touch u500vz, Transformer Book TX300
Esc
Asus
notebook
k25f, k35e, k34u, k35u, k43u, k46cb, k52f, k53e, k55a, k60ij, k70ab, k72f, k73e, k73s, k84l, k93sm, k93sv, k95vb, k501, k601, R503C, x32a, x35u, x54c, x61g, x64c, x64v, x75a, x83v, x83vb, x90, x93sv, x95gl, x101ch, x102ba, x200ca, x202e, x301a, x401a, x401u, x501a, x502c, x750ja
F8
Asus
netbook
Eee PC 1015, 1025c
Esc
Compaq

Presario
Esc, F9
Dell
desktop
Dimension, Inspiron, Latitude, Optiplex
F12
Dell
desktop

 Available link for download

Read more »
Posted by at
Labels: , , , , , , ,

Sunday, July 31, 2016

Customize a boot image that uses Windows PE 4 or Windows PE 10

Customize a boot image that uses Windows PE 4 or Windows PE 10


Use of DISM and WMI to customize an existant Windows PE 10


  1. Copy the boot image (wimpe.wim) from the Windows AIK installation folder (for example, <InstallationPath>Windows AIKToolsPEToolsamd64) to a folder on the computer from which you will customize the boot image. This procedure uses C:WinPEWAIK as the folder name. ( If you have alerady create your own WIM by following this tutorial  you can use them without copying WIM of step 1)
  2. Use DISM to mount the boot image to a local Windows PE folder. For example, type the following command-line:
    dism.exe /mount-wim /wimfile:C:WinPEWAIKwinpe.wim /index:1 /mountdir:C:WinPEMount
    Where C:WinPEWAIK is the folder that contains the boot image and C:WinPEMount is the mounted folder.
    System_CAPS_noteNote
    For more information about DISM, see the Deployment Image Servicing and Management Technical Reference topic in the Windows 7 TechNet Documentation Library.
  3. After you mount the boot image, use DISM to add optional components to the boot image. In Windows PE 3.1, for example, the optional components are located in <InstallationPath>Windows AIKToolsPEToolsamd64WinPE_FPs.
    System_CAPS_noteNote
    This procedure uses the following location for the optional components: C:Program FilesWindows AIKToolsPEToolsamd64WinPE_FPs. The path you use might be different depending on the version and installation options you choose for the Windows AIK.
    Type the following to install the optional components:
    dism.exe /image:C:WinPEMount /add-package /packagepath:"C:Program FilesWindows AIKToolsPEToolsamd64WinPE_FPswinpe-wmi.cab"
    dism.exe /image:C:WinPEMount /add-package /packagepath:"C:Program FilesWindows AIKToolsPEToolsamd64WinPE_FPswinpe-scripting.cab" 
    dism.exe /image:C:WinPEMount /add-package /packagepath:"C:Program FilesWindows AIKToolsPEToolsamd64WinPE_FPswinpe-wds-tools.cab"
    dism.exe /image:C:WinPEMount /add-package /packagepath:"C:Program FilesWindows AIKToolsPEToolsamd64WinPE_FPs<locale>winpe-wmi_<locale>.cab"
    dism.exe /image:C:WinPEMount /add-package /packagepath:"C:Program FilesWindows AIKToolsPEToolsamd64WinPE_FPs<locale>winpe-scripting_<locale>.cab"
    dism.exe /image:C:WinPEMount /add-package /packagepath:"C:Program FilesWindows AIKToolsPEToolsamd64WinPE_FPs<locale>winpe-wds-tools_<locale>.cab"
    Where C:WinPEMount is the mounted folder and locale is the locale for the components. For example, for the en-us locale, you would type:
    dism.exe /image:C:WinPEMount /add-package /packagepath:"C:Program FilesWindows AIKToolsPEToolsamd64WinPE_FPsen-uswinpe-wmi_en-us.cab"
    dism.exe /image:C:WinPEMount /add-package /packagepath:"C:Program FilesWindows AIKToolsPEToolsamd64WinPE_FPs en-uswinpe-scripting_en-us.cab"
    dism.exe /image:C:WinPEMount /add-package /packagepath:"C:Program FilesWindows AIKToolsPEToolsamd64WinPE_FPs en-uswinpe-wds-tools_en-us.cab"
    System_CAPS_tipTip
    For more information about the different packages that you can add to the boot image, see the Add a Package to a Windows PE Image topic in the Windows 7 TechNet Documentation Library.
  4. Use DISM to add specific drivers to the boot image, when required. Type the following to add drivers to the boot image, if required:
    dism.exe /image:C:WinPEMount /add-driver /driver:<path to driver .inf file>
    Where C:WinPEMount is the mounted folder.
  5. Type the following to unmount the boot image file and commit the changes.
    dism.exe /unmount-wim /mountdir:C:WinPEMount /commit
    Where C:WinPEMount is the mounted folder.
  6. Add the updated boot image to Configuration Manager to make it available to use in your task sequences. Use the following steps to import the updated boot image:
    1. In the Configuration Manager console, click Software Library.
    2. In the Software Library workspace, expand Operating Systems, and then click Boot Images.
    3. On the Home tab, in the Create group, click Add Boot Image to start the Add Boot Image Wizard.
    4. On the Data Source page, specify the following options, and then click Next.
      • In the Path box, specify the path to the updated boot image file. The specified path must be a valid network path in the UNC format. For example: <servername><WinPEWAIK share>winpe.wim.
      • Select the boot image from the Boot Image drop-down list. If the WIM file contains multiple boot images, each image is listed.
    5. On the General page, specify the following options, and then click Next.
      • In the Name box, specify a unique name for the boot image.
      • In the Version box, specify a version number for the boot image.
      • In the Comment box, specify a brief description of how the boot image is used.
    6. Complete the wizard.
  7. You can enable a command shell in the boot image to debug and troubleshoot it in Windows PE. Use the following steps to enable the command shell.
    1. In the Configuration Manager console, click Software Library.
    2. In the Software Library workspace, expand Operating Systems, and then click Boot Images.
    3. Find the new boot image in the list and identify the package ID for the image. You can find the package ID in the Image ID column for the boot image.
    4. From a command prompt, type wbemtest to open the Windows Management Instrumentation Tester.
    5. Type <SMS Provider Computer> ootsmssite_<sitecode> in Namespace, and then click Connect.
    6. Click Open Instance, type sms_bootimagepackage.packageID="<packageID>", and then click OK. For packageID, enter the value that you identified in step 3.
    7. Click Refresh Object, and then click EnableLabShell in the Properties pane.
    8. Click Edit Property, change the value to TRUE, and click Save Property.
    9. Click Save Object, and then exit the Windows Management Instrumentation Tester.
  8. You must distribute the boot image to distribution points, distribution point groups, or to collections that are associated with distribution point groups before you can use the boot image in a task sequence. Use the following steps to distribute the boot image.
    1. In the Configuration Manager console, click Software Library.
    2. In the Software Library workspace, expand Operating Systems, and then click Boot Images.
    3. Click the boot image identified in step 3.
    4. On the Home tab, in the Deployment group, click Update Distribution Points.

Available link for download

Read more »
Posted by at
Labels: , , , , , , , , , ,
Subscribe to: Posts (Atom)